
In our workshop store we carry a wide range of parts & accessories plus building materials for the DIYs

Explore our standard range below.  Can’t find what you’re looking for, just ask.  We have a timely order system with all our major suppliers (subject to availability).

Note:  This new page remains underdevelopment until our full range is uploaded

TOILET PARTS & ACCESSORIES

CAMCO LOO TREATMENT - LIQUID 1.89L

Economical 1.89L bottle, 20ml treats 10L in cassette and portable loos. No powdery residues and no excess chemical smells, lasts well over 40 uses. 3 refreshing scents available: Original Fresh Scent, Lavender Fresh or Pure Rain Scent. - Part# 850-02840
CAMCO LOO TREATMENT - SACHET

All the benefits of the Liquid in a quick and easy single use sachet. 15 sachets, each treating up to 25L. - Part# 850-02830
TOILET CASSETTES

No dump, no worries. Carry a spare cassette for a quick, easy swap in those early hours of inconvenience. - Part# 850-01592/850-01624
SC250/260 HOLDINGTANK MECHANISM

This is the complete holding tank mechanism to suit C250/C260/C263. Thetford Part# 5072706
SC250/260 HOLDINGTANK FLOAT

Replacement Thetford C250 Holding Tank Float. - Thetford Part# 50725
CASSETTE LIP SEAL

SC Lip Seal for cassettes produced after June 2000 - Thetford Part# 23721
SC2/4 and C402 PUMP

The replacement Thetford 12V pump suits C2 and C402 cassette toilets. It comes complete with fitting instructions. - Thetford Part# 16374
SC250/260 HANDLE

Replacement Handle to suit Thetford C250 / C260 / C263 Toilets - Thetford Part# 9340247
SC200 FLUSH SWITCH

Thetford C-200 Cassette Toilet Flush Switch. - Thetford Part# 23716
SC220/250/260/400/500 BLADE

Blade for Thetford SC250/260/400/500 Holding Tanks - Thetford Part# 50731
SC234 SLIDING COVER M.GREY

Replacement sliding cover to suit Thetford C2 & C200 Cassette waste tanks. This sliding cover fits over the holding tank inlet. - Thetford Part# 2133374
SC402C CONTROL PANEL COATED BOARD (Aust Models Only)

Thetford control panel assembly to suit C-400 and C-402 C cassette toilets. This unit supersedes the earlier Model Number 32320. It features updated aesthetics to match the newer toilets but is a direct replacement for the older 32320 control panel assembly. This new model now also includes the control panel handle. - Thetford Part# 5181062
FLUSH MECHANISM

Fix your flush with a replacement part SC4 Flush Mechanism - Thetford Part# 2029162
SC200S CONTROL PANEL ASSY

Thetford control panel assembly to suit C-200 cassette toilets. - Thetford Part# 2384662
SC250/260 SADDLE

Saddle to suit Thetford SC250/260 cassette toilets. - Thetford Part# 50735
Service Door 3 BLACK

Access door 3 to suit Cassette toilets. 350h x 300w. Designed for the C2, C4, C200 and C400 toilets but can be used as a simple lockable access door. - Thetford Part# 2680527
SD34567 ZADI LOCK BARREL & KEYS - 9003

Replacement barrel and key to suit the Thetford Access doors. - Thetford Part# 26604
New List Item

Description goes here

LIGHTING EQUIPMENT

LED SIDE MARKER - RED/AMBER

Overall size 74mm x 38mm x 35mm Dual Voltage 12 Volt - 24 Volt. - Part# 42ARM
LED SIDE MARKER 10-30V - RED/AMBER

Overall size 58mm x 35mm x 21mm Dual Voltage 12 Volt - 24 Volt. - Part# 35ARM
SIDE MARKER RED & AMBER 10-30V - RED/AMBER

Overall size 58mm x 35mm x 21mm Dual Voltage 12 Volt - 24 Volt. - Part# 58ARM
AMBER SIDE MARKER WITH REFLECTOR

Overall size 100mm x 38mm x 13mm Dual Voltage 12 Volt - 24 Volt. - Part# EU38AMHD
STOP/TAIL & INDICATOR LAMP 12V STRIP LIGHT WITH WHITE GROMMET

Overall size 237mm x 25mm x 18mm. Cut-out 203mm x 19mm. 12 Volt Only. - Part# 235AR12
MDL17 9-33V LED AMBER SIDE MARKER .5M CABLE BLIS.

Side Marker Lamp with Inbuilt Reflector. - Part# 91700BL
LICENCE PLATE LAMP (BL)

Part# 86060BL
SIDE MARKER LAMP - RED/AMBER. 85760BL

Overall size 115mm x 60mm x 30mm. Includes 12v festoon globe and mounting screws. - Part# 500-05110
LED LAMP STOP/TAIL/INDICATOR

Overall size 100mm x 100mm x 22mm. Slimline lamps with built in reflector. - Part# RLT100BL2S2
9-33V MDL 48 LED INDICATOR LAM

Overall size 192mm x 122mm. Model 48 LED lamps, commonly referred to as “Jumbos.” - Part# 94802
9-33V MDL 48 LED STOP/TAIL LAM

Overall size 192mm x 122mm. Model 48 LED lamps, commonly referred to as “Jumbos.” - Part# 94810
12V LED ANNEX LIGHT W/ SWITCH - WHITE

Available in White or Black. - Part# 500-05110
NARVA 12V PORCH LIGHT

Narva Porch Light with Switch - T10 Wedge halogen included. - Part# 500-05127
ASSIST HANDLE W/ 12V LED LIGHT

Coast to Coast LED Assist Handles offer practical convenience and stylish modern design. Available in 3 colours - Black, White and Chrome. - Part# 500-01066
TEARDROP LED ASSIST HANDLE W/ 12V LIGHT

Available in White or Black. - Part# 500-01072
CAMEC 12V LED SQUARE CRYSTAL TOUCH LIGHT 2 SECTION

Overall dimensions 220mm x 90mm x 13mm. Complete with four phase button switch to adjust the light between blue, daylight med and max light distribution. - Part# 040311
LED T10 SINGLE REPLACEMENT BULB - COOL WHITE - 1.35W

6 super bright LEDs and a luminous flux of 105 lumens. Operates on 12V DC. - Part# 500-05758
LED T10 WEDGE REPLACEMNET BULB - COOL WHITE - 1.76W

13 super bright LEDs and a luminous flux of 150 lumens. Operates on 12V DC. - Part# 500-05761
60 LED ROUND REPLACEMENT GLOBE

60 super bright LEDs and a luminous flux of 900 lumens. Operates on 12V DC. - Part# 500-05770
12V LED INTER LAMP

Available in 2 sizes: 130mm or 180mm. - Part# 87503/87505
CAMEC 12V 24 LED 70MM RECESSED DOWN LIGHT

Overall size 70mm x 70mm x 16mm. - Part# 040712
LED INTERNAL ROOF LIGHT .52R TOUCH WARM WITE

Overall size 236.5mm x 126.5mm x 16.5mm. Surface-mounted warm white light, diffuser made of satin polycarbonate; base made of white polycarbonate. - Part# 500-01270
12V TURN STRIP LIGHT

Part# 034342
LED AWNING LIGHT PURE WHITE 40CM 12V 5000K

Overall size 458mm x 53.5mm x 27mm. Contains 18 LEDs. - Part# 500-01252
LED SWIVEL RAIL LIGHT 460MM

It can be rotated through 180 degrees for optimum light illumination. - Part# 0013118C
12V LED 45° AWNING LIGHT

Waterproof LED awning light suitable for Caravans and Motorhomes. Operating at any voltage from 10 to 16volts. Available in Grey or White - Part# 70966
12V LED GRAB HANDLE

Overall size 500mm. It has a blue glow that can be turned on/off via a red button. It is simple to attach with two screws and two gaskets. - Part# 600-02030
TECHLIGHT 5M FLEXIBLE ADHESIVE LED STRIP LIGHTS - WARM WHITE

Low 45mA current draw per 50mm segment. High 970 lumens per metre. - Part# WZD0577

ELECTRICAL EQUIPMENT

NARVA ACCESSORY SOCKET TWIN ACCSESSORY / DUAL USB H/D

Mounting opening 29mm dia. per socket. Dustproof covers and heavy-duty construction. The fitting mechanism allows installation into interior or exterior panels including steel and aluminium. Accessory Socket 20A at 12V, 10A at 24V. USB Output 5V, 2.5A. - Part# 500-05318
NARVA SURFACE MOUNT DUAL USB SOCKET

Dustproof cover and stylish surface mount plastic housing. Moulded housing allows fitment to interior or exterior panels for easy installation. Output 5V, 2.5A. - Part# 500-05322
FIRE PRO PHOTOELECTRIC LITHIUM BATTERY SMOKE ALARM

10 year lithium battery smoke alarm. Loud 85db alarm. Suitable for all rooms. - Part# FP510V
REPCO TRAILER PLUG 7 PIN FLAT

Part# RTC07
NARVA RELAY 12V 5PIN 40A

12V 50 Amp 5 Pin with Resistor. - Part# 68028BL
WINEGARD DIRECTIONAL HANDLE RP-6300

Part# 900-00300
WINEGARD ELEVATING CRANK HANDLE RP-6795

Suit Winegard Antennas. - Part# 900-00350
WINEGARD DIRECTIONAL HANDLE SPRING RP-6822

Part# 900-00320
WINEGARD PLASTIC ELEVATING GEAR RP-3000

Part# 900-00190
WINEGARD ELEVATING SHAFT RP-4000

Includes 3 small washers and black hex nut. - Part# 900-00220
ANTSIG PAL PLUG - F SOCKET RIGHT ANGLE

Part# AP046
ANTSIG F59 TYPE TWIST-ON PLUG SUITS RG6 CABLE

Part# AP072
ANTSIG 2M BLACK RIGHT ANGLED PAL

Part# AP416
ANTSIG 3M BLACK F-CONNECTOR

Part# AP412

CARAVAN HARDWARE

CAMEC 3-POINT MAIN LOCK

Outer and Inner lock housing to suit the Camec security doors. We have stock to suit either Left or Right Hand Hinge doors. Does not include lock barrel. - Part# 014384 (LH)/014385 (RH)
CAMEC 3-POINT DOOR LOCK OUTER HOUSING

Outer lock housing to suit the Camec security doors. Does not include lock barrel. - Part# 042093
CAMEC 3-POINT DOOR LOCK INNER HANDLE KIT

Inner handle kit to suit Camec 3 point door lock. - Part# 014381
CAMEC 3-POINT DOOR LOCK OUTER HANDLE WITH SPRING

Outer Handle with spring to suit Camec 3 point lock. - Part# 014382
PANORAMA OUTER DOOR LOCK WITH KEYS

Panorama Door Lock outer only to suit Panorama door. - Part# 600-00602
BLANK CAMEC ENTRY DOOR KEYS

Pair of blank keys to suit Camec 3 point lock barrel. - Part# 042271
CAMEC ONE KEY SYSTEM , 5 + 1 LONG BARREL KIT

Part# 042089
CAMEC REMOTE CATCH PIN

Suits 31mm Narrow framed Camec Doors. - Part# 039316
CAMEC DOOR HOOK CATCH

Hook Catch for wall to suit Camec door lock. - Part# 014390
CAMEC PLASTIC GRAB HANDLE - WHITE

Part# 007988
ZADI PLASTIC GRAB HANDLE - WHITE

Part# 007983
JAYCO PLASTIC GRAB HANDLE

Available in Black or White. - Part# 600-02010
CAMEC CHROME GRAB HANDLE

Part# 036752

AWNING PARTS & ACCESORIES

CAREFREE BOTTOM BRACKET 901019

SuitS Carefree Fiesta Awnings. Available in Black or White. - Part# 200-34206
CAREFREE MAIN LOCKING KNOB 901022

Suits Carefree Fiesta Awnings. Comes with 2 black knobs and 2 backing nuts which are shaped to slip into brace. - Part# 200-34120
CAREFREE PULL DOWN STRAP 901011

Suits Carefree Fiesta Awnings. - Part# 200-34160
CAREFREE LIFT HANDLE 901015

Suits Carefree Fiesta Awnings. Comes with replacement rivet. Available in Black or White. - Part# 200-34204
DOMETIC AWNING HARDWARE CAP TOP

Suits Dometic 8700 Awning. - Part# 4453000198
DOMETIC AWNING HARDWARE FOOT

Suits Dometic 8300 / 8500 / 8700 / 9000 Awnings. - Part# 4453000044
MOUNTING BRACKET

Suits Steel Ext Pole & Curved Roof Rafter. - Part# 150-00110
DOMETIC RAFTER SLIDER ASSEMBLY

Suits Dometic 8300 / 8500 / 8700 / 9000 Awnings. - Part# 4453000041